Vibratory Nut Feeder (AFV-N series)

Reliable and durable. We use your nut samples to design and build feeders for you. That way we can guarantee that your feeders will select and feed almost any size and shape of nut to the weld electrode accurately.

A Patented, magnetized feed unit with a flexible, 3-meter vinyl delivery tube and a 200mm stroke magnetic feed unit, accurate nut delivery and positioning is assured, time after time. Fast feed rates. Seven-liter bulk hoppers and custom-designed bowls boost feed rates and keep them high.

nut feeder2Standard Features Include:

  • Vibratory bowl 300mm
  • Keyence PLC Micro-processor Transistor Output
  • Programmable screen Controls PLC without a laptop
  • Dual key locked control panel Prevents unauthorized access
  • Manual controls On outside of control panel
  • 3 meter flexible vinyl tube
  • 200mm stroke Magnetic feed unit delivers nuts accurately to your electrode
  • Universal mounting bracket Mount feed unit at almost any angle
  • 7-liter bulk hopper w/limit switch Fewer refills
  • Vinyl dust cover Prevents contamination from spatter
  • High feed rates Up to 50 nuts/minute
  • Nut separator Ensures nuts to be blown one at a time

Options Include:

  • Rotary-style bowl Low cost square weld nut feeding
  • Double selection mechanism Simultaneous feeding of two weld nuts
  • Special double mechanism Feed from right, left or both at once
  • Special stroke feed units 150mm or 300mm
  • Reverse-mounted control panel Place feeders inside fenced cells
  • Buy without controls Operating through your own
  • Orientation guide PLC Orients t-shape nuts to ±5°
  • Pneumatic nut locator No weld spatter in nut threads
  • Paint color Several options

Available Configurations Include:

  • Single out Feed one nut at a time
  • Dual out, simultaneous feed Always feed two nuts at a time
  • Dual out, selectable feed Feed either the left or right side only or feed both left and right at the same time
  • Three out Feed either one nut at a time or feed all three at the same time
  • Four out Feed either one nut at a time or all four at the same time

New Option for Upper Electrode Placement:
With Dengensha’s upper electrode weld nut placement, you can reduce weld cycle times. A patented new linkage design with fewer moving parts provides performance that is more reliable. Workpiece movement and nut feeding can be simultaneous. Accurate and secure nut positioning is possible with reduced part positioning. With this new option, placement of the fastener in a deep draw or channel is simple and accurate. Simple electrode design with a permanent magnet makes this all possible. Available for 6, 8, and 10-mm square nuts.

Receive Additional Information


Powered by ChronoForms -