[SOLD] Used TECNA Rocker Arm Welder WTR-4647 W-4000
This TECNA was used in light production for several years. They are very clean, have been fully tested, repaired as required, and meet new welder production requirements.
New foot switch installed, LOTO devices installed on air and water inlets. Arms are adjustable, short throat 15″, 363#’s of force, 2.4″ electrode opening. Deep throat 27.6″, 198#’s of force, 4.1″ electrode opening.
Ask about our safety Soft-Touch options.
Used TECNA rocker arm welder, with integrated weld control for sale. Features include – 220/440 VAC, single-phase, 20 KVA, , 4.1″ stroke, 27.6″ throat depth and 2-stage foot pedal Initiation.
| Stock / Serial #: | W-4000 |
| Manufacturer Name: | TECNA |
| Type: | Rocker Arm |
| Mfg. Model #: | WTR-4647 |
| kVA: | 20 |
| Voltage: | 220/440 |
| Phase: | Single |
| Low Secondary Voltage: | 4 |
| High Secondary Voltage: | 4 |
| # of Tap Switch Positions: | n / a |
| Max. Secondary Current: | 12,000 |
| Throat Depth to Center of Platens: | n / a |
| Platen Size: | n / a |
| Throat Depth to Center of Electrodes: | 27.6′ |
| Arm Diameter: | 1.57′ |
| Holder Diameter: | 1′ |
| Electrode Size: | 1 MT |
| Cylinder Type: | Air |
| Cylinder Diameter: | n / a |
| Cylinder Stroke: | 4.1″ |
| Maximum Weld Force, #’s: | 363 |
| Weld Control Manufacturer: | TECNA |
| Weld Control Mfg. Model #: | TE-90 |
| Disconnect Size: | n / a |
| Initiation: | 2 Stage Foot Switch |
| General Condition: | Welders were used in light production for several years, they are very clean, have been fully tested, repaired as required, and meet new welder production requirements. |
| Additional Details: | New foot switch installed, LOTO devices installed on air and water inlets. Arms are adjustable, short throat 15″, 363#’s of force, 2.4″ electrode opening. Deep throat 27.6″, 198#’s of force, 4.1″ electrode opening. |
| Warranty: | 6-Months |
| Availability: | Immediate |